Amp Car Views
Sometimes, you just need to crank up the volume. Car audio systems must overcome a good deal of ambient noise--a vehicle traveling down the highway in the company of other loud engines is surrounded by a high background noise level. Factory-installed head units have a modest amount of amplification (generally about 10 watts per channel or less), and many aftermarket head units have at least twice that. The more power the amp included with your CD or cassette player delivers, the cleaner the sound from the speakers. But be careful--a receiver rated at 50 watts maximum power probably has no more than 20 watts of clean power. For that reason, serious mobile listeners eschew the modest amplifiers built into head units and instead opt for powerful external amplifiers.
For the easiest and typically least expensive installation, look for a single amplifier to power all the speakers in a car system. This would be the number of channels listed on the amp, as a single channel is only capable of powering one speaker. Moreover, look for an amplifier that contains its own crossovers; these circuits split the music frequencies so (for example) the highs go to the front speakers while the lows go the rear speakers. This helps maximize power delivery to the speakers and improve sound. When shopping, look at the way an amplifier lets you control these crossovers. Some use rotary controls, while others have less accessible inset controls requiring a screwdriver for adjustment.
Amplifiers don't really come with a massive array of features, but there are a few to consider. Soft-start circuitry eliminates the thumps and thuds that can be annoying and potentially damaging to car speakers. Depending on your application, the number of speaker-level and line-level outputs and inputs need to be considered. Make sure you have enough for the setup you are currently installing, while leaving room for at least one future upgrade.
Installing car audio amplifiers is one of the trickiest things a newbie car audio installer can attempt. Car amp installation requires that all sorts of panels be removed and that various wires be run all over the car. Installing car audio amplifiers is a step by step process which I have outlined here. If you have any questions please contact me by clicking here. Please do not attempt a car amp installation if you are not comfortable with the process. Leave it to a professional. Now here are the steps on how to install a car amp. There is also a wiring diagram below. NOTE: These directions assume you have already physically mounted your amplifier to a solid, non-conductive surface (non-metal). If you have not purchased your power wiring be sure to read this article on choosing wire gauge for amplifiers.
Amp Car Images
